{"title":"Non Metallic","description":"\u003cp\u003e\u003cspan style=\"color: #ffffff;\"\u003eRegular non metallic decals, not suitable for dark color headstocks. Lighter colors are transparent and interact with the background color, the final result varies according to the background color or pattern. \u003cspan face=\"Arial\" style=\"font-family: Arial;\"\u003eThese are clear coated decals, more resistant and easy to apply. \u003c\/span\u003eAfter application can be finished with Nitro, Polyurethane or any other kind of lacquer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #f1c232;\"\u003eUltra thin decal film vanishes once applied and lacquered, meaning there’s no visible edge, backing or bump.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #f1c232;\"\u003eHigh resolution crisp prints show even small text and details clearly.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #f1c232;\"\u003eSuitable for use on non-porous, non-oily surfaces like lacquered wood, plastic, metal and even candles - use on guitars, bikes, helmets, models and more.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #f1c232;\"\u003eUse a spray lacquer over the top of them once applied - most spray lacquers are fine, including nitrocellulose.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #f1c232;\"\u003eFull application and finishing instructions included.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #f1c232;\"\u003eWe don’t recommend using them on oiled surfaces, or using any oil or brush on finishes over the top.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #f1c232;\"\u003eBackground is totally transparent\/clear once applied (not white). \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"axis-all-black","title":"Music Man Axis - All black","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScissors\u003c\/p\u003e\n\u003cp\u003ePaper\u003c\/p\u003e\n\u003cp\u003eTowels\u003c\/p\u003e\n\u003cp\u003eBowl of warm water\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cem\u003e\u003cspan size=\"4\" style=\"font-size: large;\" rwr=\"1\"\u003e\u003cspan lang=\"EN-US\"\u003e\u003cspan size=\"4\" style=\"font-size: large;\" rwr=\"1\"\u003e\u003cspan size=\"4\" style=\"font-size: large;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\n\u003c\/div\u003e","brand":"Music Man","offers":[{"title":"Default Title","offer_id":493938376723,"sku":"30","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Music_Man_Axis.jpg?v=1511141527"},{"product_id":"sting-ray-all-black","title":"Sting Ray - All black","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e","brand":"Music Man","offers":[{"title":"Default Title","offer_id":493946699795,"sku":"30","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/MusicMan_Stingray_01.jpg?v=1511141569"},{"product_id":"sting-ray-5-all-black","title":"Sting Ray 5 - All black","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e","brand":"Music Man","offers":[{"title":"Default Title","offer_id":493956235283,"sku":"30","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/MusicMan_Stingray5_01.jpg?v=1511141614"},{"product_id":"sting-ray-bass-yellow-logo","title":"Sting Ray Bass - Yellow logo","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ci data-mce-fragment=\"1\"\u003e\u003c\/i\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003ci data-mce-fragment=\"1\"\u003e\u003c\/i\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e","brand":"Music Man","offers":[{"title":"Default Title","offer_id":493983498259,"sku":"30","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Musicman_Stingray_Bass_Yellow_01.jpg?v=1511141717"},{"product_id":"music-man-sabre-yellow-logo","title":"Music Man Sabre Bass - Yellow logo","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ci\u003e\u003c\/i\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ci\u003e\u003c\/i\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e","brand":"Music Man","offers":[{"title":"Default Title","offer_id":493996474387,"sku":"30","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Music_Man_Sabre_Bass_01.jpg?v=1511141761"},{"product_id":"music-man-sabre-ii-yellow-logo","title":"Music Man Sabre II - Yellow logo","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ci\u003e\u003c\/i\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ci\u003e\u003c\/i\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e","brand":"Music Man","offers":[{"title":"Default Title","offer_id":494020853779,"sku":"30","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Music_Man_Sabre_II.jpg?v=1511141849"},{"product_id":"music-man-sterling-all-black","title":"Music Man Sterling - All black","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e","brand":"Music Man","offers":[{"title":"Default Title","offer_id":494040121363,"sku":"30","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Music_Man_Sterling_01.jpg?v=1511141931"},{"product_id":"music-man-luke-all-black","title":"Music Man Luke - All black","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e","brand":"Music Man","offers":[{"title":"Default Title","offer_id":494050574355,"sku":"30","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Musicman_Luke_01.jpg?v=1511141972"},{"product_id":"copy-of-axis-all-black","title":"Charvel by Jackson - All black","description":"\u003cdiv\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003ci\u003e\u003c\/i\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Jackson \/ Charvel","offers":[{"title":"Default Title","offer_id":724664975379,"sku":"30","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Charvel_by_Jackson_01.jpg?v=1569046463"},{"product_id":"jackson-usa-all-black","title":"Jackson USA - All black","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e","brand":"Jackson \/ Charvel","offers":[{"title":"Default Title","offer_id":724714684435,"sku":"30","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Jackson_USA_Black_01.jpg?v=1512753051"},{"product_id":"jackson-adrian-smith-all-black","title":"Jackson Adrian Smith - All black","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e","brand":"Jackson \/ Charvel","offers":[{"title":"Default Title","offer_id":724728676371,"sku":"30","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Jackson_Adrian_Smith_01.jpg?v=1512753120"},{"product_id":"copy-of-jackson-adrian-smith-all-black","title":"Charvel USA - All black","description":"\u003cdiv\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Jackson \/ Charvel","offers":[{"title":"Default Title","offer_id":724737949715,"sku":"30","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Charvel_USA_01.jpg?v=1569046463"},{"product_id":"copy-of-charvel-usa-all-black","title":"Eddie Van Halen EVH - All black","description":"\u003cdiv\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Jackson \/ Charvel","offers":[{"title":"Default Title","offer_id":724756004883,"sku":"30","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/EVH_Art_Series_01.jpg?v=1569046463"},{"product_id":"squier-bullet-bass-silver-and-black","title":"Squier Bullet Bass - Silver and Black","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e Metallic ink.\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper Towels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e","brand":"Squier","offers":[{"title":"Default Title","offer_id":7623971143740,"sku":"","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Squier_Bullet_Bass_01.jpg?v=1524174140"},{"product_id":"chandler-san-francisco-all-black","title":"Chandler San Francisco - ALL BLACK","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScissors\u003c\/p\u003e\n\u003cp\u003ePaper\u003c\/p\u003e\n\u003cp\u003eTowels\u003c\/p\u003e\n\u003cp\u003eBowl of warm water\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Chandler","offers":[{"title":"Default Title","offer_id":32297554247740,"sku":"30","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/ChandlerSanFranciscoBLACK.jpg?v=1610297350"},{"product_id":"silhouette-special-all-black","title":"Music Man Silhouette Special - All black","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScissors\u003c\/p\u003e\n\u003cp\u003ePaper\u003c\/p\u003e\n\u003cp\u003eTowels\u003c\/p\u003e\n\u003cp\u003eBowl of warm water\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cem\u003e\u003cspan size=\"4\" style=\"font-size: large;\" rwr=\"1\"\u003e\u003cspan lang=\"EN-US\"\u003e\u003cspan size=\"4\" style=\"font-size: large;\" rwr=\"1\"\u003e\u003cspan size=\"4\" style=\"font-size: large;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\n\u003c\/div\u003e","brand":"Music Man","offers":[{"title":"Default Title","offer_id":32309101723708,"sku":"","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/MusicManSilhouetteSpecial.jpg?v=1593530311"},{"product_id":"custom-built-jason-smith","title":"Custom Built - Jason Smith","description":"\u003cp\u003e\u003cstrong\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWATER SLIDE APPLICATION INSTRUCTIONS \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. \u003c\/strong\u003eGather these materials before you start:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScissors\u003c\/p\u003e\n\u003cp\u003ePaper\u003c\/p\u003e\n\u003cp\u003eTowels\u003c\/p\u003e\n\u003cp\u003eBowl of warm water\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Cut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. \u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e When you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Remove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e Use a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e When the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32690223480892,"sku":"","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/CustomBuilt-JasonSmith.jpg?v=1610217027"},{"product_id":"fender-custom-shop-line-version","title":"Fender Custom Shop (Line Version)","description":"\u003cp\u003e\u003cstrong\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWATER SLIDE APPLICATION INSTRUCTIONS \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. \u003c\/strong\u003eGather these materials before you start:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScissors\u003c\/p\u003e\n\u003cp\u003ePaper\u003c\/p\u003e\n\u003cp\u003eTowels\u003c\/p\u003e\n\u003cp\u003eBowl of warm water\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Cut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. \u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e When you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Remove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e Use a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e When the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32690316705852,"sku":"10","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/CustomShop_LineVersion.jpg?v=1610217196"},{"product_id":"fender-custom-shop-30th-anniversary","title":"Fender Custom Shop 30TH ANNIVERSARY","description":"\u003cp\u003e\u003cstrong\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003cbr\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWATER SLIDE APPLICATION INSTRUCTIONS \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. \u003c\/strong\u003eGather these materials before you start:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScissors\u003c\/p\u003e\n\u003cp\u003ePaper\u003c\/p\u003e\n\u003cp\u003eTowels\u003c\/p\u003e\n\u003cp\u003eBowl of warm water\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Cut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. \u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e When you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Remove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e Use a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e When the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32690321358908,"sku":"10","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/FenderCustomShop30THANNIVERSARY.jpg?v=1610217317"},{"product_id":"fender-custom-shop-greg-fessler-1","title":"Fender Custom Shop Greg Fessler","description":"\u003cp\u003e\u003cstrong\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWATER SLIDE APPLICATION INSTRUCTIONS \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. \u003c\/strong\u003eGather these materials before you start:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScissors\u003c\/p\u003e\n\u003cp\u003ePaper\u003c\/p\u003e\n\u003cp\u003eTowels\u003c\/p\u003e\n\u003cp\u003eBowl of warm water\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Cut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. \u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e When you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Remove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e Use a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e When the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32690322145340,"sku":"10","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/FenderCustomShopGregFessler.jpg?v=1610217346"},{"product_id":"fender-custom-shop-john-cruz-1","title":"Fender Custom Shop John Cruz","description":"\u003cp\u003e\u003cstrong\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWATER SLIDE APPLICATION INSTRUCTIONS \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. \u003c\/strong\u003eGather these materials before you start:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScissors\u003c\/p\u003e\n\u003cp\u003ePaper\u003c\/p\u003e\n\u003cp\u003eTowels\u003c\/p\u003e\n\u003cp\u003eBowl of warm water\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Cut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. \u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e When you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Remove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e Use a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e When the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32690325094460,"sku":"10","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/FenderCustomShopJohnCruz.jpg?v=1610217444"},{"product_id":"fender-custom-shop-limited-edition-grey-yellow","title":"Fender Custom Shop Limited Edition GREY \u0026 YELLOW","description":"\u003cp\u003e\u003cstrong\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWATER SLIDE APPLICATION INSTRUCTIONS \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. \u003c\/strong\u003eGather these materials before you start:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScissors\u003c\/p\u003e\n\u003cp\u003ePaper\u003c\/p\u003e\n\u003cp\u003eTowels\u003c\/p\u003e\n\u003cp\u003eBowl of warm water\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Cut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. \u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e When you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Remove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e Use a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e When the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32690327945276,"sku":"10","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/FenderCustomShopLimitedEditionGREY_YELLOW.jpg?v=1610217507"},{"product_id":"fender-custom-shop-limited-edition-grey","title":"Fender Custom Shop Limited Edition GREY","description":"\u003cp\u003e\u003cstrong\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWATER SLIDE APPLICATION INSTRUCTIONS \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. \u003c\/strong\u003eGather these materials before you start:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScissors\u003c\/p\u003e\n\u003cp\u003ePaper\u003c\/p\u003e\n\u003cp\u003eTowels\u003c\/p\u003e\n\u003cp\u003eBowl of warm water\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Cut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. \u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e When you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Remove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e Use a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e When the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32690337775676,"sku":"","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/FenderCustomShopLimitedEditionGREY.jpg?v=1610217588"},{"product_id":"fender-custom-shop-paul-waller","title":"Fender Custom Shop Paul Waller","description":"\u003cp\u003e\u003cstrong\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWATER SLIDE APPLICATION INSTRUCTIONS \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. \u003c\/strong\u003eGather these materials before you start:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScissors\u003c\/p\u003e\n\u003cp\u003ePaper\u003c\/p\u003e\n\u003cp\u003eTowels\u003c\/p\u003e\n\u003cp\u003eBowl of warm water\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Cut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. \u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e When you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Remove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e Use a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e When the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32690339807292,"sku":"","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/FenderCustomShopPaulWaller.jpg?v=1610217638"},{"product_id":"fender-custom-shop-set-3-models-set","title":"Fender Custom Shop SET (3 models set)","description":"\u003cp\u003e\u003cstrong\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWATER SLIDE APPLICATION INSTRUCTIONS \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. \u003c\/strong\u003eGather these materials before you start:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScissors\u003c\/p\u003e\n\u003cp\u003ePaper\u003c\/p\u003e\n\u003cp\u003eTowels\u003c\/p\u003e\n\u003cp\u003eBowl of warm water\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Cut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. \u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e When you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Remove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e Use a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e When the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32690341642300,"sku":"","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/FenderCustomShopSET.jpg?v=1610217685"},{"product_id":"fender-custom-shop-yuriy-shishkov-1","title":"Fender Custom Shop Yuriy Shishkov","description":"\u003cp\u003e\u003cstrong\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWATER SLIDE APPLICATION INSTRUCTIONS \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. \u003c\/strong\u003eGather these materials before you start:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScissors\u003c\/p\u003e\n\u003cp\u003ePaper\u003c\/p\u003e\n\u003cp\u003eTowels\u003c\/p\u003e\n\u003cp\u003eBowl of warm water\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Cut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. \u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e When you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Remove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e Use a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e When the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32690342297660,"sku":"","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/FenderCustomShopYuriyShishkov.jpg?v=1610217717"},{"product_id":"jaguar-japan","title":"Jaguar (Japan) NON-METALLIC","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003cbr\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32690404163644,"sku":"","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Jaguar_Japan_e9aab99b-1e40-4dda-a8ba-caa82bfe8aad.jpg?v=1610218500"},{"product_id":"jazz-bass-1974","title":"Jazz Bass 1974 NON-METALLIC","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32690534350908,"sku":"","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/JazzBass1974Yellow.jpg?v=1610220541"},{"product_id":"jazzmaster-1968-1975-all-black","title":"Jazzmaster 1968-1975 ALL BLACK","description":"\u003cp\u003e\u003cstrong\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image). \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWATER SLIDE APPLICATION INSTRUCTIONS \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. \u003c\/strong\u003eGather these materials before you start:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScissors\u003c\/p\u003e\n\u003cp\u003ePaper\u003c\/p\u003e\n\u003cp\u003eTowels\u003c\/p\u003e\n\u003cp\u003eBowl of warm water\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Cut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. \u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e When you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Remove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e Use a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e When the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32690970886204,"sku":"","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Jazzmaster1968-1975ALLBLACK.jpg?v=1610240708"},{"product_id":"jazzmaster-1965","title":"Jazzmaster 1965 NON-METALLIC","description":"\u003cp\u003e\u003cstrong\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image). \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003cbr\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWATER SLIDE APPLICATION INSTRUCTIONS \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. \u003c\/strong\u003eGather these materials before you start:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScissors\u003c\/p\u003e\n\u003cp\u003ePaper\u003c\/p\u003e\n\u003cp\u003eTowels\u003c\/p\u003e\n\u003cp\u003eBowl of warm water\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Cut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. \u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e When you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Remove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e Use a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e When the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32690970918972,"sku":"","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Jazzmaster1965.jpg?v=1610240790"},{"product_id":"stratocaster-1954-1960-grey-logo-vintage-look","title":"Stratocaster 1954-1960 (GREY LOGO - VINTAGE LOOK) NON-METALLIC","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32691454410812,"sku":"","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Stratocaster1954-1960_GREYLOGO-VINTAGE.jpg?v=1610275505"},{"product_id":"stratocaster-1954-1960","title":"Stratocaster 1954-1960 NON-METALLIC","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32691454967868,"sku":"","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Stratocaster1954-1960.jpg?v=1610275536"},{"product_id":"stratocaster-1964-1965","title":"Stratocaster 1964-1965 NON-METALLIC","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32691455295548,"sku":"","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Stratocaster1964-1965.jpg?v=1610275571"},{"product_id":"stratocaster-1969-cbs","title":"Stratocaster 1969 CBS NON-METALLIC","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32691457163324,"sku":null,"price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Stratocaster1969CBSYellow.jpg?v=1610275748"},{"product_id":"stratocaster-japan","title":"Stratocaster Japan NON-METALLIC","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32691457654844,"sku":null,"price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/StratocasterJapan.jpg?v=1610275776"},{"product_id":"stratocaster-richie-sambora","title":"Stratocaster Richie Sambora NON-METALLIC","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32691458048060,"sku":null,"price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/StratocasterRichieSambora.jpg?v=1610275811"},{"product_id":"stratocaster-rory-gallagher","title":"Stratocaster Rory Gallagher NON-METALLIC","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32691458375740,"sku":null,"price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/StratocasterRoryGallagher.jpg?v=1610275836"},{"product_id":"stratocaster-srv-grey","title":"Stratocaster SRV GREY - NON METALLLIC","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32691458670652,"sku":null,"price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/StratocasterSRVGREY.jpg?v=1610275861"},{"product_id":"stratocaster-usa-1990-s","title":"Stratocaster USA 1990´s NON-METALLIC","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32691458900028,"sku":null,"price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/StratocasterUSA1990_s.jpg?v=1610275883"},{"product_id":"custom-esquire-1959","title":"Custom Esquire 1959 NON-METALLIC","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32691708166204,"sku":"","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/CustomEsquire1959.jpg?v=1610284680"},{"product_id":"limited-edition-double-esquire-thinline-custom","title":"LIMITED EDITION DOUBLE ESQUIRE® THINLINE CUSTOM - NON-METALLIC","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32691708264508,"sku":"","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/LIMITEDEDITIONDOUBLEESQUIRE_THINLINECUSTOM.jpg?v=1610284742"},{"product_id":"telecaster-1952","title":"Telecaster 1952 NON-METALLIC","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32691709116476,"sku":null,"price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Telecaster1952.jpg?v=1610284770"},{"product_id":"telecaster-1961","title":"Telecaster 1961 NON-METALLIC","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32691709870140,"sku":null,"price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Telecaster1961.jpg?v=1610284789"},{"product_id":"telecaster-1966","title":"Telecaster 1966 NON-METALLIC","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32691710918716,"sku":null,"price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Telecaster1966.jpg?v=1610284821"},{"product_id":"telecaster-1969","title":"Telecaster 1969 NON-METALLIC","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32691711934524,"sku":null,"price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/Telecaster1969.jpg?v=1610284849"},{"product_id":"telecaster-american-standard","title":"Telecaster American Standard NON-METALLIC","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32691712524348,"sku":null,"price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/TelecasterAmericanStandard.jpg?v=1610284868"},{"product_id":"telecaster-usa-1980-s","title":"Telecaster USA 1980’s NON-METALLIC","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003e\u003cstrong\u003eNon metallic decal.\u003c\/strong\u003e\u003c\/i\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ci\u003eYellow and\/or grey colours presented on the image ARE NOT GOLD OR SILVER.\u003c\/i\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ci\u003eLighter colours are transparent and interact with the background colour.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eThe final result varies according to the background colour or pattern.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003eNot suitable for black or dark colour headstocks.\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003ci\u003e\u003c\/i\u003e\u003c\/div\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e1.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eScissors\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePaper\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTowels\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBowl of warm water\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e2.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e3.\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e4.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e5.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e6.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e7.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Fender","offers":[{"title":"Default Title","offer_id":32691713114172,"sku":null,"price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/TelecasterUSA1980_s.jpg?v=1610284908"},{"product_id":"esp-series-all-black","title":"ESP Series ALL BLACK","description":"\u003cp\u003e\u003cstrong\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScissors\u003c\/p\u003e\n\u003cp\u003ePaper\u003c\/p\u003e\n\u003cp\u003eTowels\u003c\/p\u003e\n\u003cp\u003eBowl of warm water\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e","brand":"ESP","offers":[{"title":"Default Title","offer_id":32692013269052,"sku":"","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/ESPSeriesALLBLACK.jpg?v=1610359540"},{"product_id":"music-man-steve-morse-all-black","title":"Music Man Steve Morse All Black","description":"\u003cp\u003e\u003cstrong\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScissors\u003c\/p\u003e\n\u003cp\u003ePaper\u003c\/p\u003e\n\u003cp\u003eTowels\u003c\/p\u003e\n\u003cp\u003eBowl of warm water\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e","brand":"Music Man","offers":[{"title":"Default Title","offer_id":32692184219708,"sku":"","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/MusicManSteveMorseAllBlack.jpg?v=1610308474"},{"product_id":"music-man-headstock-back-decals-all-black","title":"Music Man headstock back decals All Black","description":"\u003cp\u003e\u003cstrong\u003eWaterslide decal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease confirm size before completing the purchase (rulers on top and on the bottom of the decal image).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWATER SLIDE APPLICATION INSTRUCTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePrepare your wood surface by applying at least one coat of hard finish, such as varnish or lacquer. Waterslide decals may not adhere properly on satin finish.\u003c\/p\u003e\n\u003cp\u003eFor best results apply the decal over bright shiny surfaces. You may also apply the decals to a fully finished instrument (no need for sanding if the surface is clean and smooth).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eGather these materials before you start:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScissors\u003c\/p\u003e\n\u003cp\u003ePaper\u003c\/p\u003e\n\u003cp\u003eTowels\u003c\/p\u003e\n\u003cp\u003eBowl of warm water\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCut the decal roughly 1 to 2 mm around the edge of the image, the edge will be transparent once you slide it off the backing paper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eOnce the decal is cut out, plan your placement of it on the instrument. If you are installing two decals on the same instrument, use a ruler to make sure they are positioned symmetrically. Use masking tape to mark the positions so you can easily place the wet decal(s) properly without guessing.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhen you are ready to apply the decal, plunge it into the warm water and hold it under the surface for 30-60 seconds, until you can begin to slide the thin film off the backing paper.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRemove the decal from the backing and place it carefully onto the instrument. You should be able to slide it a little to centre it properly. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUse a paper towel to gently dab off the excess moisture and work any wrinkles and bubbles out of the decal. This takes a little time. Look at the reflection of light on the decal to help you spot the bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhen the decal is smooth, set it aside to dry thoroughly, for at least 3 hours or more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8.\u003c\/strong\u003e After the decal is fully dry  you can apply a top coat of clear varnish to seal it permanently. You must apply several \"dust coats\" first and let them dry otherwise you are at risk of the decal melting. Metallic decals (Gold or Silver) are more sensitive to chemicals, water based lacquer is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMore aggressive products like Nitro or polyurethane can react with the ink if they melt thru the decals protective coat, to avoid this light spray (myst coats) the first 4 coats and make sure the first coat is fully dry before you apply the next.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eStep 8 is optional\u003c\/em\u003e\u003c\/strong\u003e, but if you want the decal to be permanent, you’ll need to put sealer over it. If you think you might want to change the decoration sometime in the future, then you can leave it unsealed. It can be peeled off by lifting one edge with a razor blade and pulling the dry film up and off.\u003c\/p\u003e","brand":"Music Man","offers":[{"title":"Default Title","offer_id":32692184645692,"sku":"","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1296\/5237\/products\/MusicManheadstockbackdecals.jpg?v=1610308508"}],"url":"https:\/\/www.voodoo-decals.com\/collections\/non-metallic.oembed?page=9","provider":"Voodoo Decals","version":"1.0","type":"link"}